Narkomed 2C

Drägerwerk · Anesthesia

Open your document

Drager Narkomed 2C Technical Service Bulletin 156 Software Version 1.30

Service ManualArchive copyEN
Open ↗

Drager Anesthesia Machine Narkomed 2C PMC Procedure

Other DocumentArchive copyEN
Open ↗

Drager Narkomed 2C 3 4 Field Service Procedure Installation of Saturn Power Supply and CPU

Other DocumentArchive copyEN
Open ↗

Drager Narkomed 2C Anesthesia System Operator's Instruction Manual

Operator's ManualArchive copyEN
Open ↗

Drager Narkomed 2C Anesthesia System Setup and Installation Manual

Operator's ManualArchive copyEN
Open ↗

Drager Narkomed 2C Field Service Procedure PMC Procedure

Other DocumentArchive copyEN
Open ↗

Drager Ventilator Narkomed 2C PMC Procedure Field Service Procedure

Other DocumentArchive copyEN
Open ↗

Narkomed-2C-Service-Manual

Operator's ManualArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
📞 Still stuck? Call Drägerwerk

Contact Drägerwerk US

📞 Tech support
1-800-437-2437 (follow prompts for Technical Support)
🕘 Hours
M-F 8am-6pm ET; 24/7 emergency technical assistance

Source ↗

Missing a manual, code, or fix for this model? Tell us.