Narkomed 3

Drägerwerk · Anesthesia

Open your document

Drager Narkomed NM3 Anesthesia System Technical Service Manual

Service ManualArchive copyEN
Open ↗

Drager Narkomed 2B 3 Network Hardware Upgrade Instructions

Other DocumentArchive copyEN
Open ↗

Drager Narkomed 2C 3 4 Field Service Procedure Installation of Saturn Power Supply and CPU

Other DocumentArchive copyEN
Open ↗

Drager Narkomed NM3 Multispec IR Source Pin Lubrication Procedure

Other DocumentArchive copyEN
Open ↗

Drager Narkomed NM3 NM2B O.R. Data Manager Software Installation Procedure

Other DocumentArchive copyEN
Open ↗

Drager Narkomed NM3 O2MED(B) Offset Adjustment Procedure

Other DocumentArchive copyEN
Open ↗

Drager Narkomed NM3 Preventative Maintenance Procedure Serial Interface Assembly

Other DocumentArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
📞 Still stuck? Call Drägerwerk

Contact Drägerwerk US

📞 Tech support
1-800-437-2437 (follow prompts for Technical Support)
🕘 Hours
M-F 8am-6pm ET; 24/7 emergency technical assistance

Source ↗

Missing a manual, code, or fix for this model? Tell us.