ManualsDinamap ProCare
GE HealthCare · Patient Monitors
Open your document
Open ↗
Dinamap ProCare Operation Manual
GEHC-Service-Manual DINAMAP-ProCare-Monitor-2008
General Electric Patient Monitor DINAMAP ProCare Monitor Service Manual
Stuck? Start here
✅ Check the simple stuff first
- Make sure the patient is safe — swap in a backup unit if you need to.
- Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
- Check power, battery, cables, accessories, and settings before ordering parts.
- Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Patient Monitors (1)
Leads off / no signal (telemetry) source ↗
- Re-attach ECG leads
- Confirm transmitter is in coverage and batteries are good
📞 Still stuck? Call GE HealthCare
Contact GE HealthCare US
- 📞 Tech support
- 1-800-437-1171, option 1
- 🛠️ Service
- 1-800-437-1171, option 2 (service parts, quotes, returns)
- 🕘 Hours
- PCS diagnostic cardiology remote tech support 8am-5pm M-F
- 🌐 Portal
- Support portal ↗
- 🔩 Parts
- Order parts ↗
Also on https://www.gehealthcare.com/en-us/about/contact-us (Service Assistance US opt 1).
Missing a manual, code, or fix for this model? Tell us.