ManualsHospira APM APMII
ICU Medical · Infusion Pumps
Open your document
Open ↗
Abbott APM APMII 13960 13965 Service Manual Part 2
Abbott Hospira APM APMII 13960-04 13965-04 Technical Service Manual
Abbott Pain Management Provider APMII Service Manual
Abbott APM Schematic and Parts
Abbott Pain Management APM Installation Test Guide
Abbott Pain Management APM System Operating Manual
Stuck? Start here
✅ Check the simple stuff first
- Make sure the patient is safe — swap in a backup unit if you need to.
- Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
- Check power, battery, cables, accessories, and settings before ordering parts.
- Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Infusion Pumps (5)
Occlusion source ↗
- Check for closed clamps/stopcocks, kinks, IV site patency
- Check pump height vs patient (LVP)
Air-in-line source ↗
- Look for small bubbles; disconnect and re-prime
Door/cassette/syringe loading source ↗
- Close door with set seated; check syringe clamp, flange and plunger holders
Battery/AC source ↗
- Run on AC; replace/maintain battery; battery service alarms → repair
Device/system error source ↗
- Power cycle once; if it repeats remove from service
📞 Still stuck? Call ICU Medical
Contact ICU Medical US
- 📞 Tech support
- 1-800-241-4002, option 3
- ✉️ Email
- [email protected]
Parts: [email protected]. Canada 1-866-488-6088.
Missing a manual, code, or fix for this model? Tell us.