ManualsHospira LifeCare 5000 Plum
ICU Medical · Infusion Pumps
Open your document
Open ↗
Abbott Lifecare 5000 Service Manual Part 4
Abbott Lifecare 5000 Service Manual Part 5
Abbott Lifecare 5000 Service Manual Part 6
Hospira LifeCare 5000 Plum 2507-04 upwards Technical Service Manual
Hospira Infusion Pump LifeCare 5000 Plum Technical Service Manual
Stuck? Start here
✅ Check the simple stuff first
- Make sure the patient is safe — swap in a backup unit if you need to.
- Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
- Check power, battery, cables, accessories, and settings before ordering parts.
- Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Infusion Pumps (5)
Occlusion source ↗
- Check for closed clamps/stopcocks, kinks, IV site patency
- Check pump height vs patient (LVP)
Air-in-line source ↗
- Look for small bubbles; disconnect and re-prime
Door/cassette/syringe loading source ↗
- Close door with set seated; check syringe clamp, flange and plunger holders
Battery/AC source ↗
- Run on AC; replace/maintain battery; battery service alarms → repair
Device/system error source ↗
- Power cycle once; if it repeats remove from service
📞 Still stuck? Call ICU Medical
Contact ICU Medical US
- 📞 Tech support
- 1-800-241-4002, option 3
- ✉️ Email
- [email protected]
Parts: [email protected]. Canada 1-866-488-6088.
Missing a manual, code, or fix for this model? Tell us.