HotLine HL-90

ICU Medical · Warmers

Open your document

Smiths Hotline General technical manual

Service ManualArchive copyEN
Open ↗

Smiths Level 1 Hotline HL-90 Operators and Service Manual

Service ManualArchive copyEN
Open ↗

Smiths Medical Hotline HL-90 Technical Service Pack

Service ManualArchive copyEN
Open ↗

Smiths HL-90 User manual

Operator's ManualArchive copyEN
Open ↗

Smiths HotLine Level 1 One Year Protocol Maintenance

Other DocumentArchive copyEN
Open ↗

Smiths Hotline Maintenance Guide

Other DocumentArchive copyEN
Open ↗

Smiths Level 1 Hotline HL-90 Instructions For Use

Operator's ManualArchive copyEN
Open ↗

Smiths Medical Hotline Fluid Warmer HL-90 Instruction Manual

Operator's ManualArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Warmers (2)

No power / no heat source ↗

  • Check outlet, cord, fuses
  • Check thermocouple/heater connections

Over-temp alarm source ↗

  • Check over-temp door/thermostat; call service
📞 Still stuck? Call ICU Medical

Contact ICU Medical US

📞 Tech support
1-800-241-4002, option 3
✉️ Email
[email protected]

Parts: [email protected]. Canada 1-866-488-6088.

Source ↗

Missing a manual, code, or fix for this model? Tell us.