ManualsThermogard XP
ZOLL Medical · Warmers
Open your document
Open ↗
ZOLL Thermogard XP — Icy® Intravascular Heat Exchange Catheter Kit Instructions for Use, Rev 8 Multi-language +2 106925-001 Catheters +2
ZOLL Thermogard XP — Quattro® Intravascular Heat Exchange Catheter Kit Instructions for Use, Rev 8 Multi-language +2 106935-001 Catheters +2
ZOLL Thermogard XP — Set-Up Guide, TGXP Surface SUK, Rev 7 English (U.S.) 106941-001 Thermogard XP®
ZOLL Thermogard XP — Solex 7® Intravascular Heat Exchange Catheter Kit Instructions for Use, Rev 5 Multi-language +2 106939-001 Catheters +2
ZOLL Thermogard XP — Surface Start-Up Kit Instructions for Use, Rev 9 English (U.S.) +0 106876-002 Thermogard XP®
ZOLL Thermogard XP — TGXP Operation Manual with Surface, Rev 4 English (U.S.) 601473-001 Thermogard XP®
ZOLL Thermogard XP — Tyvek Lid, TGXP SURFACE with Reservoir Start up kit, Rev 2 English (U.S.) +0 106872-003 Thermogard XP®
Stuck? Start here
✅ Check the simple stuff first
- Make sure the patient is safe — swap in a backup unit if you need to.
- Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
- Check power, battery, cables, accessories, and settings before ordering parts.
- Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Warmers (2)
No power / no heat source ↗
- Check outlet, cord, fuses
- Check thermocouple/heater connections
Over-temp alarm source ↗
- Check over-temp door/thermostat; call service
📞 Still stuck? Call ZOLL Medical
Contact ZOLL Medical US
- 📞 Tech support
- 1-800-348-9011
24/7 emergency support page: https://www.zoll.com/en-us/service-and-support/product-notices-and-regulations/emergency-support
Missing a manual, code, or fix for this model? Tell us.