Manuals7200 Series
Medtronic · Ventilators
Open your document
Open ↗
Puritan Bennett 7200 Series Service Manual - Rev A (Index-1)
Puritan Bennett 7200 Series Service Manual - Rev A (Part I)
Puritan Bennett 7200 Series Service Manual - Rev A (Sec 11)
Puritan Bennett 7200 Series Service Manual - Rev A (Sec 17)
Puritan Bennett 7200 Series Service Manual - Rev A (Sec 19)
Puritan Bennett 7200 Series Service Manual - Rev A (Sec 7)
Puritan-Bennett 7200AE Technical & Training Manual
Stuck? Start here
✅ Check the simple stuff first
- Make sure the patient is safe — swap in a backup unit if you need to.
- Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
- Check power, battery, cables, accessories, and settings before ordering parts.
- Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Ventilators (3)
Any technical fault source ↗
- Ventilate patient by other means first, note code, send for service
Disconnection/leak/loss of PEEP source ↗
- Check circuit, ET tube and expiratory valve
Flow sensor alarms source ↗
- Remove water, recalibrate, replace sensor
📞 Still stuck? Call Medtronic
Contact Medtronic US
- 📞 Tech support
- 1-800-255-6774
- 🛠️ Service
- 1-800-962-9888, option 2
- ✉️ Email
- [email protected]
- 🕘 Hours
- Ventilation: M-F 8am-6pm CT; AC&M (Nellcor/BIS/Capnostream): M-F 6:30am-4:30pm MT
Ventilators: 800-255-6774 opt 4 (tech support/service scheduling), opt 3 (service agreements). Nellcor/BIS/INVOS/Capnostream: opt 1 then opt 2 ([email protected]). Service phone = US customer service.
Missing a manual, code, or fix for this model? Tell us.