Oxylog 2000

Drägerwerk · Ventilators

Open your document

Drager Microvent Oxylog 2000 PMS Parts Reference Guide

Parts ListArchive copyEN
Open ↗

Drager Oxylog 2000 PMS Procedure

Other DocumentArchive copyEN
Open ↗

Drager Oxylog 2000 Service Manual

Operator's ManualArchive copyEN
Open ↗

Drager Oxylog 2000 Test procedures

Other DocumentArchive copyEN
Open ↗

Drager Oxylog2000 Service manu

Other DocumentArchive copyEN
Open ↗

Drager Oxylog2000+ Technical D

Other DocumentArchive copyEN
Open ↗

Oxylog 2000 Operating Manaul S

Operator's ManualArchive copyEN
Open ↗

Oxylog 2000 Spare parts list

Parts ListArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Ventilators (3)

Any technical fault source ↗

  • Ventilate patient by other means first, note code, send for service

Disconnection/leak/loss of PEEP source ↗

  • Check circuit, ET tube and expiratory valve

Flow sensor alarms source ↗

  • Remove water, recalibrate, replace sensor
📞 Still stuck? Call Drägerwerk

Contact Drägerwerk US

📞 Tech support
1-800-437-2437 (follow prompts for Technical Support)
🕘 Hours
M-F 8am-6pm ET; 24/7 emergency technical assistance

Source ↗

Missing a manual, code, or fix for this model? Tell us.