Lucas 2 Chest Compression System

Stryker · SCD (Compression)

Open your document

Stryker Chest Compression System Block Diagram LUCAS 2 Chest Compression System Service Manual

Operator's ManualArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for SCD (Compression) (2)

Leak / low pressure / kinked tube source ↗

  • Inspect garment and tubing; replace garment

Garment disconnected source ↗

  • Reconnect or replace garment
📞 Still stuck? Call Stryker

Contact Stryker US

📞 Tech support
1-800-327-0770, option 2
✉️ Email
[email protected]
🕘 Hours
M-F 8am-7pm ET
🌐 Portal
Support portal ↗

Emergency Care (LIFEPAK): +1 800 327 0770; software/connectivity +1 844 999 2787 (https://www.stryker.com/us/en/emergency-care/contact.html).

Source ↗

Missing a manual, code, or fix for this model? Tell us.