ManualsPB980
Medtronic · Ventilators
Open your document
Open ↗
PB980 Australia/New Zealand Operator's Manual Software Version 8.2.0.54 or higher
PB980 Australia/New Zealand Operator’s Manual Software Version 8.0.9.0 or higher
PB980 Australia/New Zealand Operator’s Manual Software Version 8.1.0.46 or higher
PB980 English IE Sync Addendum
PB980 English Li-ion Battery Pack Addendum
PB980 English OUS Capnography Addendum
PB980 English US Only Capnography Addendum
PB980 English US-only Exhalation Filter Adapter Installation & Reference Guide
PB980 High Flow Oxygen Therapy Addendum
PB980 NIV Plus Addendum Addendum
PB980 Nebulizer Addendum Addendum
PB980 Outside US English Operator's Manual Software Version 7.6.1.0 or higher
PB980 Outside US English Operator's Manual Software Version 8.2.0.54 or higher
PB980 R7.0 SW Update Addendum
PB980 R7.1 SW Update Addendum
PB980 US-only Customer Manual Addendum
PB980 US-only English Operator's Manual Software Version 8.2.0.54 or higher
PB980 US-only English Operators Manual Software Version 7.6.1.0 or higher
PB980 US-only English Operator’s Manual Software Version 8.0.9.0 or higher
PB980 US-only English Operator’s Manual Software Version 8.1.0.46 or higher
Stuck? Start here
✅ Check the simple stuff first
- Make sure the patient is safe — swap in a backup unit if you need to.
- Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
- Check power, battery, cables, accessories, and settings before ordering parts.
- Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Ventilators (3)
Any technical fault source ↗
- Ventilate patient by other means first, note code, send for service
Disconnection/leak/loss of PEEP source ↗
- Check circuit, ET tube and expiratory valve
Flow sensor alarms source ↗
- Remove water, recalibrate, replace sensor
📞 Still stuck? Call Medtronic
Contact Medtronic US
- 📞 Tech support
- 1-800-255-6774
- 🛠️ Service
- 1-800-962-9888, option 2
- ✉️ Email
- [email protected]
- 🕘 Hours
- Ventilation: M-F 8am-6pm CT; AC&M (Nellcor/BIS/Capnostream): M-F 6:30am-4:30pm MT
Ventilators: 800-255-6774 opt 4 (tech support/service scheduling), opt 3 (service agreements). Nellcor/BIS/INVOS/Capnostream: opt 1 then opt 2 ([email protected]). Service phone = US customer service.
Missing a manual, code, or fix for this model? Tell us.