Manuals7000
GE HealthCare · Ventilators
Open your document
Open ↗
Ohmeda 7000 Service Manual
Datex Ohmeda Modulus II with 7000 Ventilator Maintenance Procedures
Datex Ohmeda Ventilator 7000 Anaesthesia Ventilator Service Manual
Datex Ohmeda Ventilator 7000 Operation and Maintenance Manual
Datex Ohmeda Ventilator 7000 Service Manual
Ohmeda 7000 Maintenance Procedures
Stuck? Start here
✅ Check the simple stuff first
- Make sure the patient is safe — swap in a backup unit if you need to.
- Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
- Check power, battery, cables, accessories, and settings before ordering parts.
- Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Ventilators (3)
Any technical fault source ↗
- Ventilate patient by other means first, note code, send for service
Disconnection/leak/loss of PEEP source ↗
- Check circuit, ET tube and expiratory valve
Flow sensor alarms source ↗
- Remove water, recalibrate, replace sensor
📞 Still stuck? Call GE HealthCare
Contact GE HealthCare US
- 📞 Tech support
- 1-800-437-1171, option 1
- 🛠️ Service
- 1-800-437-1171, option 2 (service parts, quotes, returns)
- 🕘 Hours
- PCS diagnostic cardiology remote tech support 8am-5pm M-F
- 🌐 Portal
- Support portal ↗
- 🔩 Parts
- Order parts ↗
Also on https://www.gehealthcare.com/en-us/about/contact-us (Service Assistance US opt 1).
Missing a manual, code, or fix for this model? Tell us.