ManualsServo-i
Getinge · Ventilators
Open your document
Open ↗
(FR) Servo-i Guide de Formation
Maquet-Servo--i-Computer-Interface-Emulator---Reference-manual
Maquet-Servo-i-Service-overview
Maquet-Servo-i-V3.0-Users-Manual
Maquet-Servo-i-V3.1-Users-Manual
Maquet-Servo-i-V3.1-Users-Manual
Servo-i User's Manual
Stuck? Start here
✅ Check the simple stuff first
- Make sure the patient is safe — swap in a backup unit if you need to.
- Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
- Check power, battery, cables, accessories, and settings before ordering parts.
- Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Ventilators (3)
Any technical fault source ↗
- Ventilate patient by other means first, note code, send for service
Disconnection/leak/loss of PEEP source ↗
- Check circuit, ET tube and expiratory valve
Flow sensor alarms source ↗
- Remove water, recalibrate, replace sensor
📞 Still stuck? Call Getinge
Contact Getinge US
- 📞 Tech support
- 1-888-943-8872
- ✉️ Email
- [email protected]
- 🌐 Portal
- Support portal ↗
Missing a manual, code, or fix for this model? Tell us.