Bair Hugger Series 200 500

Solventum · Warmers

Open your document

Arizant Bair Hugger Series 200 and 500 - Service Manual

Service ManualArchive copyEN
Open ↗

Bair Hugger Series 200 and 500 Warming Units Service Manual (Undated)

Service ManualArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Warmers (2)

No power / no heat source ↗

  • Check outlet, cord, fuses
  • Check thermocouple/heater connections

Over-temp alarm source ↗

  • Check over-temp door/thermostat; call service
📞 Still stuck? Call Solventum

Contact Solventum US

📞 Tech support
1-800-228-3957

Medical device (e.g. Bair Hugger) support.

Source ↗

Missing a manual, code, or fix for this model? Tell us.