Manuals500
Stryker · Defibrillators
Open your document
Open ↗
Lifepak 500 Operating Instructions (DE)
Lifepak 500 Operations Manual
Stuck? Start here
✅ Check the simple stuff first
- Make sure the patient is safe — swap in a backup unit if you need to.
- Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
- Check power, battery, cables, accessories, and settings before ordering parts.
- Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Defibrillators (1)
Won't charge or deliver shock source ↗
- Isolate controls: try paddles vs. pads vs. front-panel buttons
- Check pad/paddle contact and cables (impedance disarm)
- Check battery / run on AC; slow charge often = battery
- Read stored failure codes in service mode before replacing therapy module
📞 Still stuck? Call Stryker
Contact Stryker US
- 📞 Tech support
- 1-800-327-0770, option 2
- ✉️ Email
- [email protected]
- 🕘 Hours
- M-F 8am-7pm ET
- 🌐 Portal
- Support portal ↗
Emergency Care (LIFEPAK): +1 800 327 0770; software/connectivity +1 844 999 2787 (https://www.stryker.com/us/en/emergency-care/contact.html).
Missing a manual, code, or fix for this model? Tell us.