SIPAP Infant Flow SiPAP

BD · Ventilators

Open your document

CareFusion SIPAP Infant Flow SiPAP Operator s manual

Operator's ManualArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Ventilators (3)

Any technical fault source ↗

  • Ventilate patient by other means first, note code, send for service

Disconnection/leak/loss of PEEP source ↗

  • Check circuit, ET tube and expiratory valve

Flow sensor alarms source ↗

  • Remove water, recalibrate, replace sensor
📞 Still stuck? Call BD

Contact BD US

📞 Tech support
1-866-488-1408
🛠️ Service
1-800-482-4822 (customer order management)
✉️ Email
[email protected]
🕘 Hours
Alaris hardware: option 1, 5am-5pm PT M-F

BD Alaris. Customer advocacy 888-812-3266 ([email protected]).

Source ↗

Missing a manual, code, or fix for this model? Tell us.