AT-2

Schiller AG · ECG

Open your document

Schiller AT-2 6 Channel Service Manual

Service ManualArchive copyEN
Open ↗

Schiller AT-2 12 Channel ECG User manual

Operator's ManualArchive copyEN
Open ↗

Schiller AT-2 AT-102 Spiro - Maintenance

Other DocumentArchive copyEN
Open ↗

Schiller AT-2 Quick reference chart

Other DocumentArchive copyEN
Open ↗

Schiller AT-2 User manual

Operator's ManualArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for ECG (2)

Leads off / bad waveform source ↗

  • Swap patient cable, then harness, then ECG board

Power/battery source ↗

  • Check AC fuses; fewer than 10 reports per charge = replace battery

Missing a manual, code, or fix for this model? Tell us.