Propaq LT

Baxter · ECG

Open your document

Welch Allyn Propaq LT Service Manual

Service ManualArchive copyEN
Open ↗

Micropaq and Propaq LT ECG Cable 3 Lead, DIN, AHA, 8', User Manual

Operator's ManualOEM officialEN
Open ↗

Micropaq and Propaq LT ECG Cable 3 Lead, DIN, IEC, 8', User Manual

Operator's ManualOEM officialEN
Open ↗

Micropaq and Propaq LT ECG Cable 5 Lead Attached, Snap. AHA, 10', User Manual

Operator's ManualOEM officialEN
Open ↗

Micropaq and Propaq LT ECG Cable 5 Lead, User Manual

Operator's ManualOEM officialEN
Open ↗

Micropaq and Propaq LT ECG Cable, User Manual

Operator's ManualOEM officialEN
Open ↗

Propaq LT Vital Signs Monitor, Software Version 1.60.XX, User Manual

Operator's ManualOEM officialEN
Open ↗

Propaq LT Vital Signs Monitor, Software Version 1.70.XX, User Manual

Operator's ManualOEM officialEN
Open ↗

Propaq LT v1.60.07 Update Application, Installation Guide

Other DocumentOEM officialEN
Open ↗

Welch Allyn Propaq LT Monitor, User Manual, Multi-Language

Operator's ManualOEM officialEN
Open ↗

Welch Allyn Propaq LT Quick Reference

Other DocumentArchive copyEN
Open ↗

Welch Allyn Propaq LT Vital Signs Monitor - User manual

Operator's ManualArchive copyEN
Open ↗

Welch Allyn Propaq LT Vital Signs Monitor Software Version 1.60.XX, User Manual

Operator's ManualOEM officialEN
Open ↗

Welch Allyn Propaq LT v1.60.07 Update Application, User Instruction

Operator's ManualOEM officialEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for ECG (2)

Leads off / bad waveform source ↗

  • Swap patient cable, then harness, then ECG board

Power/battery source ↗

  • Check AC fuses; fewer than 10 reports per charge = replace battery
📞 Still stuck? Call Baxter

Contact Baxter US

📞 Tech support
1-800-535-6663, option 2
🛠️ Service
1-800-445-3720 (Hillrom beds/stretchers/lifts parts, service, tech support)
✉️ Email
[email protected]
🌐 Portal
Support portal ↗
🔩 Parts
Order parts ↗

Welch Allyn monitoring/cardiology: 800-535-6663 opt 2. Hillrom beds service email [email protected], parts [email protected]. Sigma Spectrum pumps: 1-800-843-7867 (catalog.baxter.com/baxterUS/en/contactus). Fee-based tech support for beds/stretchers without contract since 2025-03-31.

Source ↗

Missing a manual, code, or fix for this model? Tell us.