Cardiovit AT-10

Schiller AG · ECG

Open your document

Schiller AT-10 - Service Handbook

Other DocumentArchive copyEN
Open ↗

Schiller AT-10 Schematics

Other DocumentArchive copyEN
Open ↗

Schiller Cardiovit AT-I0 Service Handbook 1998

Other DocumentArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for ECG (2)

Leads off / bad waveform source ↗

  • Swap patient cable, then harness, then ECG board

Power/battery source ↗

  • Check AC fuses; fewer than 10 reports per charge = replace battery

Missing a manual, code, or fix for this model? Tell us.