2025

Stryker · Hospital Beds

Open your document

2025 Maintenance Manual (2025-100-005)

Service ManualOEM officialP/N 2025-100-005Rev DEN
Open ↗

2025 Maintenance Manual (2025-100-006)

Service ManualOEM officialP/N 2025-100-006EN
Open ↗

2025 Maintenance Manual (2025-100-007)

Service ManualOEM officialP/N 2025-100-007Rev MEN
Open ↗

2025 Maintenance Manual (2025-100-008)

Service ManualOEM officialP/N 2025-100-008Rev AEN
Open ↗

Stryker 2025 2026 Critical Care Bed Maintenance Manual

Service ManualArchive copyEN
Open ↗

2025 Operations Manual (2025-100-004)

Operator's ManualOEM officialP/N 2025-100-004Rev JEN
Open ↗

Stryker 2025 2026 Critical Care Bed Operations Manual

Operator's ManualArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Hospital Beds (1)

Function doesn't move source ↗

  • Check lockout controls
  • Head stuck after manual CPR lowering: reset CPR per IFU
📞 Still stuck? Call Stryker

Contact Stryker US

📞 Tech support
1-800-327-0770, option 2
✉️ Email
[email protected]
🕘 Hours
M-F 8am-7pm ET
🌐 Portal
Support portal ↗

Emergency Care (LIFEPAK): +1 800 327 0770; software/connectivity +1 844 999 2787 (https://www.stryker.com/us/en/emergency-care/contact.html).

Source ↗

Missing a manual, code, or fix for this model? Tell us.