3000

Stryker · Hospital Beds

Open your document

3000 Maintenance Manual (3001-005-098)

Service ManualOEM officialP/N 3001-005-098Rev DEN
Open ↗

3000 Maintenance Manual (3001-006-097)

Service ManualOEM officialP/N 3001-006-097EN
Open ↗

3000 Maintenance Manual (3001-008-096)

Service ManualOEM officialP/N 3001-008-096EN
Open ↗

3000 Maintenance Manual (3001-012-097)

Service ManualOEM officialP/N 3001-012-097EN
Open ↗

3000 Document (3001-003-097)

Other DocumentOEM officialP/N 3001-003-097EN
Open ↗

3000 Operations Manual (3001-000-021)

Operator's ManualOEM officialP/N 3001-000-021Rev GEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Hospital Beds (1)

Function doesn't move source ↗

  • Check lockout controls
  • Head stuck after manual CPR lowering: reset CPR per IFU
📞 Still stuck? Call Stryker

Contact Stryker US

📞 Tech support
1-800-327-0770, option 2
✉️ Email
[email protected]
🕘 Hours
M-F 8am-7pm ET
🌐 Portal
Support portal ↗

Emergency Care (LIFEPAK): +1 800 327 0770; software/connectivity +1 844 999 2787 (https://www.stryker.com/us/en/emergency-care/contact.html).

Source ↗

Missing a manual, code, or fix for this model? Tell us.