FL26E

Stryker · Hospital Beds

Open your document

FL26E Maintenance Manual (72-0795E)

Service ManualOEM officialEN
Open ↗

Stryker Electric Med Surg Bed FL26E Maintenance Manual

Service ManualArchive copyEN
Open ↗

FL26E Document (72-0796E)

Parts ListOEM officialEN
Open ↗

FL26E Operations Manual (72-0794E)

Operator's ManualOEM officialEN
Open ↗

Stryker Electric Med Surg Bed FL26E Operations Manual

Operator's ManualArchive copyEN
Open ↗

Stryker Electric Med Surg Bed FL26E Parts Lists

Parts ListArchive copyEN
Open ↗

Stuck? Start here

✅ Check the simple stuff first
  1. Make sure the patient is safe — swap in a backup unit if you need to.
  2. Reproduce the complaint yourself and write down exactly what you see (screen, alarm, code).
  3. Check power, battery, cables, accessories, and settings before ordering parts.
  4. Then open the service manual above and follow its troubleshooting section.
🧰 Common checks for Hospital Beds (1)

Function doesn't move source ↗

  • Check lockout controls
  • Head stuck after manual CPR lowering: reset CPR per IFU
📞 Still stuck? Call Stryker

Contact Stryker US

📞 Tech support
1-800-327-0770, option 2
✉️ Email
[email protected]
🕘 Hours
M-F 8am-7pm ET
🌐 Portal
Support portal ↗

Emergency Care (LIFEPAK): +1 800 327 0770; software/connectivity +1 844 999 2787 (https://www.stryker.com/us/en/emergency-care/contact.html).

Source ↗

Missing a manual, code, or fix for this model? Tell us.